Instruction Manual

01

Keep oxygen cylinder in upright position.

02

Check the cylinder’s content level on
the pressure supply gauge.
a) If the indicator needle is all the way
to 2,000 psi, the tank is full.
b) If the indicator needle is in the red
area, the cylinder is empty.

03

Connect one end tubing to outlet

04

And other to mask or amubag.

05

Activate the oxygen flow with the regulator control knob.Can adjust flow rate between .12 to 15 ltr. Per minute.

06

Open the knob slowly. (Check the bubbles in the air).

07

Put mask over the face and breath.

08

Nebulizing container can be used along with oxygen cylinder for quick relief to asthma patient.

09

After use close the valve properly.

Instruction Manual for 100ltr.

01

Keep oxygen cylinder in upright
position.

02

Check the cylinder’s content level on the pressure supply gauge.
a) If the indicator needle is all the way to 2,000 psi, the tank is full.
b) If the indicator needle is in the red area, the cylinder is empty.

03

Connect one end tubing to outlet

04

And other to mask or amubag.

05

Open the knob slowly.
(Check the bubbles in the air).

06

Put mask over the face and breath.

07

Nebulizing container can be used along with oxygen cylinder for quick relief to asthma patient..

08

After use close the valve properly.

WARNING

Cylinder should not be filled with any gas other than the one it now contains.
Do not alter or modify this cylinder or the valve in any way or the colour of the cylinder.
No flammable material should be stored in the immediate vicinity of this cylinder.
Improper use , filing storage or dispossible may result in personal injury.
No oil or similar lubricants should be used on the valves or other fittings of this cylinder.
Only trained personnel should replace devices like valve and pressure gauge.
Always secure cylinder in a cool dry area and out of reach of childrens.
Do not remove, alter or tear the warning label.